Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
1b. Optional Deckplate Installation:
Place the deckplate (D) and the gasket (E) on the
sink or countertop. Insert the top mount install (B) into
the deckplate (D). Do not over tighten.
Note: If the surface is uneven, use silicone under the
gasket (E).
Note: "Front" on the top mount install (B) must face
the front of the sink or countertop. The two mounting
plates (a) on the top mount install (B) must be loose
movable during the installation of the top mount
install (B).
2. Press the top mount install (B) so that it can not move,
then turn the screw with the provided hex wrench (K,
HEX: 6.0 mm) clockwise, as shown in Fig 1. When the
mounting plates (a) make contact with the sink,
continue to turn the screw with the provided hex
wrench (K, HEX: 6.0 mm) clockwise, until the top mount
install (B) is completely tightened and secured, as
shown in Fig 2.
1b
2
5
B
a
D
K
B
D
a
Fig 1
K
B
D
a
Fig 2
SIMPLEFIT
Reduces installation
time
D
E
Sink
Sink
TM
Publicidad
