Publicidad
Idiomas disponibles
Idiomas disponibles
PRESET NUMBER TUNING
Use the remote control to select the preset number directly.
1 Press the TUNER/BAND
button to select a band.
2 Press the numbered
buttons to select a preset
number.
Example:
To select preset number 20, press the +10, +10 and Obuttons.
To select preset number 15, press the +10 and 5 buttons.
Selecting a preset number on the main unit
Press the TUNER/BAND button to select a band. Then, press
the 4
DIRECTION/PRESET
button repeatedly.
Each time the button is pressed, the next ascending number is
selected.
To clear a preset station
Select the preset number of the station to be cleared. Then, press
the
CLEAR button, and press the II SET button within 4
seconds.
The preset numbers of all other stations in the band with higher
numbers are also decreased by one.
To change the AM tuning interval
The default setting of the AM tuning interval is 10 kHz/step.
If
you use this unit in an area where the frequency allocation system
is 9 kHz/step, change the tuning interval.
Press the POWER button while pressing
button.
To reset the interval, repeat this procedure.
m
the TUNER/BAND
When the AM tuning interval is changed, all preset stations (see
"PRESETTING STATIONS") are cleared.
The preset stations
have to be set again.
ENGLISH
10
Publicidad
