Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
7. Insert Shelf Support (9) into the desired holes inside each side
compartment. Make sure you place the four shelf supports at the
same level to level the shelf, and put in the Adjustable shelf (5).
To remove the shelves, push the tabs on the shelf supports and lift
the shelf.
Hardware Used
9
Shelf Support
8. Peel and stick two silicone pads (14) onto the inside corners of each
door.
Hardware Used
14
Silicone pads
Toe Kick Assembly Instructions
NOTE: Toe Kick need to be purchased separately.
9a. Install Front clasp (11) in front of the base cabinet leg, then install the
appropriate length size of the Toe Kick and press down the clasp to
secure the Toe Kick.
9b. Install Side clasp (10) in side of the base cabinet leg, remove the
protective film from 3M adhesive paper on the side clasp, then attach the
appropriate length size of the Toe Kick to the clasp, press to make sure
it sticks firmly.
Hardware Used
10
Side clasp
11
Front clasp
7
1
x 4
5
8
14
x 4
9
10
x 4
x 2
6
DISASSEMBLING
9
Tab
1. Insert the release key into the triangle hole.
2. The release key needs to be fully inserted.
3. You will need more than 1 for some panels.
4. It is importand that release key in the sides meet each other so that you are sure the frame is fully unlocked.
1
11
RELEASE KEY
2
3
7
Publicidad
