VEVOR AY450-1 Manual De Instrucciones página 3

Warning-To reduce the risk of injury, user must read instructions
manual carefully. Always follow basic safety precautions when
using these devices. These include:
PLEASE NOTE:
To get the maximum life and most efficient operation of your equipment,
please comply with all the instructions below. Clean the equipment
thoroughly before the first use and after each use. Avoid using high
alkalinity cleaners as they may cause the casting to become dull, discolor,
or dent.
SAFETY NOTE:
The blades on this equipment are VERY SHARP! Use extreme care when
handling and operating this equipment, and always keep your hands clear
of the cutting area while using this equipment!
OPERATION:
1. Install the table stopper using the screw provided. Place equipment on a
sturdy firm work surface.
2. Pull the handle all the way toward you until the pusher contacts the slide
stop.
3. Carefully place a tomato on the slide board between the pusher
assembly and the blades.
4. Remove your hand from the cutting area, and with one quick and quickly
push the handle forward with force
5. Catch the sliced tomato with your hand or cut it into a pan. Remove any
product left on the slide board before slicing the next tomato and repeat as
necessary.
Replacing the blade and thruster:
IMPORTANT SAFEGUARDS
- 2 -