Publicidad
Idiomas disponibles
Idiomas disponibles
How to use High Flow
Inflator/Deflator
Adapter
Body
1.
Place the universal valve adapter
over high flow inflator/deflator
adapter body as shown.
5.
Nozzle
attached to
"inflation"
outlet
Insert nozzle into inflatable and
then start inflator, see "How to
Start" paragraph.
2.
3.
4.
Press lever on universal valve
adapter down to lock in place.
NOTE: If the universal valve
adapter will not lock in place pull
it away from the adapter body so
it is not flush.
not flush
Choose nozzle to be used to
inflate or deflate. NOTE: The seal
ring may be used with any of the
nozzles to prevent air from leaking
out of inflatables with very large air
inlets.
The high flow inflate/deflate
adapter body attachment
has an
"inflation"
outlet and "deflation"
outlet. Attach the nozzle to the
preferred outlet. NOTE:
"inflation"
and "Deflation"
are
marked at outlets.
NOTE: If inflatable is not getting firm
enough, place thumb over the
"deflation" outlet to allow air to go
directly into the inflatable.
Risk of Bursting.
DO NOT over-
inflate. Keeping thumb over
"Deflation"
outlet could cause
inflatable to over-inflate,
Use
caution when placing thumb over
"Deflation"
outlet.
Nozzle
attached to
"deflation"
outlet
D30502
12-ENG
Publicidad
