Publicidad
Idiomas disponibles
Idiomas disponibles
4.
Set the switch (3) to the position "on". The appliance will start working.
5.
Move over the surface of the material without pressing down too much.
6.
It is advisable to test first in a not visible area.
7.
Depending on the materials that you want to shave, you can place the
higher cut accessory (2). This accessory makes the distance between the
material and the blade higher.
MAINTENCE AND CLEANING
• Be careful when using as the blades are very sharp.
• The product should not be treated with liquids or immersed in liquids.
• Wipe the device only with a dry lint-free cloth.
• Before cleaning, turn the on/off switch to the 'OFF' position. To empty the
fluff tank, remove and clean using a brush. Clean the grille using a brush.
• To clean the inside of the grille and the cutters zone, unscrew the grill support
in a counterclockwise direction.
• When storage box in fated about 80%. clean storage box and inside cutter
should be performed.
When the time comes to eliminate this product, please consider the
environmental impact and take it to recognized recycling facility instead
of disposing it with general household waste. Take the equipment to a
waste disposal site. Plastic and metal parts that are used in the construction
of this appliance can be separated into pure grade which allow recycling.
Ask to your service centre for details. Every one of us can participate on the
environmental protection.
17
Publicidad
