Operation And Maintenance; Parts Description - Tristar IK-6174 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
Instruction manual
• Note: To avoid danger by accidental resetting the thermal protection,
this appliance may not be powered through an external switching
device, such as a timer, or connected to a circuit that regularly will be
switched on or off.
• Using an extension cord or something similar is not allowed.
• Make sure that the cord is not hanging over the edge of the table or
counter, does not touch any hot surfaces or is coming directly into
contact with the hot parts of the appliance. Do not place the appliance
underneath or close to curtains, window coverings etc.
• Make sure the cord does not touch the hot parts of the appliance.
• We advise to place a heat resistant coating between your table and the
appliance (this way you don't get burns on your table or table cloth).
• Do not use this appliance in the bathroom or near a sink filled with
water. If this appliance has fallen into the water do not under no
circumstances directly grab this appliance, but first pull the plug from
the socket.
(*) Competent qualified electrician: after sales department of the producer
or importer or any person who is qualified, approved and competent to
perform this kind of repairs in order to avoid all danger. In any case you
should return the appliance to this electrician.

PaRTS DeScRIPTIoN

1. Ceramic induction plate
2. Control panel
3. Display
4

oPeRaTIoN aND maINTeNaNce

• Remove all packaging of the device.
• Check if the voltage of the appliance corresponds to the main voltage of
your home. Rated voltage : AC220-240V 50Hz.
• Always place the unit on a flat stable surface and ensure at least 15
cm. free space around the unit. This device is not suitable for outdoor
installation or use.
only use dedicated induction pans on this device.
you can recognize these pans by the following icon:
If there is no dedicated induction pan placed on the device, it will not
recognize the pan and the error code EO will appear on the display. The
device will switch off automatically because of safety reasons.
A
B
C
1
uSe
• Insert the plug into a grounded outlet and place the induction pan on
the ceramic induction plate (no. 1). Press the power button (F) To turn
the device on.
2
• Flashing - - - - will appear on the display. Press Press the Select button (E)
3
and choose the desired watt by using the up (D) and down (C) button.
D
E
F

Publicidad

Tabla de contenido
loading

Tabla de contenido