Publicidad
Idiomas disponibles
Idiomas disponibles
CONCRETE-PAINT MIXER
POWDP7080
1 APPLICATION
This tool is suitable for mixing a variety of materials in liquid form. Any use other than that for
which the tool is intended or any modification of the tool can lead to a serious risk of accident.
The manufacturer cannot assume liability for damages arising out of improper use of the tool.
▪
Light liquids and mixtures, such as paint, varnish or plaster.
▪
Heavier liquids and mixtures, such as adhesives, wallpaper paste, fillers or mortar.
It is not designed for commercial use.
WARNING! Read this manual and general safety instructions carefully
before using the appliance, for your own safety. Your power tool should
only be passed on together with these instructions.
2 DESCRIPTION (FIG A°-FIG 2)
1.
ON/OFF switch
2.
Safety lock
3.
Speed dial
4.
Air Vents
5.
Handle
3 PACKAGE CONTENT LIST
▪
Remove all packing materials
▪
Remove remaining packaging and transit supports (if existing)
▪
Check the completeness of the packing content
▪
Check the appliance, the power cord, the power plug and all accessories for transportation
damages.
▪
Keep the packaging materials as far as possible till the end of the warranty period.
Dispose it into your local waste disposal system afterwards.
WARNING Packing materials are no toys! Children must not play with
plastic bags! Danger of suffocation!
1 x Mixer
1 x mixer paddle
2 x spanner
1 x Manual
Copyright © 2019 VARO NV
POWDP7080
6.
Motor shaft
7.
Charger (not included)
8.
Battery (not included)
9.
Spanner
10. Paddle
P a g e
| 3
EN
www.varo.com
Publicidad
