Ryobi RDV4 Manual De Instrucciones página 3

ORIGINAL INSTRUCTIONS
EN
Safety, performance, and dependability
have been given top priority in the
design of your palm vac.
INTENDED USE
The palm vac is only intended for light
vacuuming on desktop surfaces.
Do not use the product for any other
purpose.
VACUUM SAFETY WARNINGS
This product can be used by children
aged from 8 years and above and
persons with
sensory or mental capabilities or
lack of experience and knowledge
if they have been given supervision
or instruction concerning use of the
product in a safe way and understand
the hazards involved. Children shall
not play with the product. Cleaning
and user maintenance shall not be
made by children without supervision.
The product is intended for household
use only.
Never vacuum materials such as hot
coals, cigarette butts, matches, etc.
Do not use the product without the
filter in place.
Do not use the product to pick up hard
objects such as nails, screws, coins,
etc. Damage or injury could result.
Always close the battery cover and lock
it in place before use. Do not expose the
battery pack to rain or wet conditions.
Remove the battery when the
product is not in use or when
changing accessories.
Rechargeable batteries are to be
removed from the product before
being charged.
reduced physical,
Exhausted batteries are to be
removed from the product and
safely disposed of.
If the product is to be stored unused
for a long period, the batteries
should be removed.
The supply terminals are not to be
short-circuited.
ADDITIONAL BATTERY SAFETY
WARNINGS
To reduce the risk of fire, personal
injury, and product damage due to
a short circuit, never immerse your
tool, battery pack or charger in fluid
or allow a fluid to flow inside them.
Corrosive or
such as seawater, certain industrial
chemicals, and bleach or bleach-
containing products, etc., can cause
a short circuit.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance
with local and national provisions and
regulations.
Follow all special
on packaging and
transporting batteries by a third party.
Ensure that no batteries can come
in contact with other batteries or
conductive materials while in transport
by protecting exposed connectors with
insulating, non-conductive
tape. Do not transport batteries that
are cracked or leaking. Check with the
forwarding company for further advice.
KNOW YOUR PRODUCT
See page 65.
1. On/Off button
2. Battery cap
3. LED light
4. Crevice tool
conductive fluids,
requirements
labelling when
caps or
3
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
EL