Publicidad
Idiomas disponibles
Idiomas disponibles
•After the installation ,make sure that the cooker hood is level to avoid grease
collection at on end.
Ensure the exhaust ducting selected for installation complies with relevant standards
and is fire retardant.
WARNING:
Start Using Your Cooker Hood
Touch
There are four button:
(Lamp) button. See picture above.
1. Power-on: After connecting the cooker hood to the main supply, the backlight of
button will turn on, the alarm will sound, output will be closed and the cooker hood will
enter into stand-by mode.
2.
(Power) button:
2.1 Press the
(Power) button, the motor starts to work, and the LED display will
show "1", means low speed. The indicator lights of power button,speed button and
lamp button and LED light will be on at the same time.Press the
again, the motor will stop and the hood enter stand-by mode.The above steps can be
operated repeatedly.
2.2Each button can be independently turned on (except for the delay function), and the
power button can shut down all functions.
3.
(Lamp) button:
Press
(Lamp) button, the LED light will be on,and the indicator lights of lamp
For safety reason, please use only the same size of
fixing or mounting screw which are recommended in this
instruction manual.
Failure to install the screws or fixing device in
accordance with these instructions may result in
electrical hazards.
control
(Power) button ,
with
(Speed) button,
LED
(Timer) button,
(Power) button
display
Publicidad
