Nivian NV-CAM01-SOLAR 4G Manual De Usuario página 3

INSTALLATION TIPS
The PIR presence sensor is sensitive to heat and cold disturbances, please note
the following:
The PIR presence sensor is sensitive to heat and cold disturbances, please note the
following: Avoid installing the camera where there is air flow agitation. For example:
the air outlet of the air conditioner, the heat dissipation port of the equipment, the
side of the fan, the vicinity of the curtain, etc. Do not install the camera in front of
the glass or mirror. The installation height of the camera should be 2.5m to 3m,
the optimal distance for motion detection by the PIR sensor. Do not install the
camera upside down.
Ceiling/Wall Mounting
1
Use the installation paper template to make holes, and then insert the
toggles to mount the device.
2
Installation of camera base.
Solar mount installation.
3
The solar panel is installed outdoors and then connected to the camera.
4
Pole Mounting
1
Attach the iron plate behind the battery
compartment of the dome camera with
screws
Install the camera on the post holding the
2
hoop
Solar mount installation
3
The solar panel is installed outdoors and
4
then connected to the camera.
EN