Uline H-11211 Instrucciones De Montaje página 2

2. Align armrest with holes on bottom of seat cushion.
Use three 1/4 x 1¼" screws (C) to attach. Repeat on
opposite side. (See Figure 2)
NOTE: Use Allen wrench to tighten all screws.
Figure 2
3. Align mechanism with holes on bottom of seat
cushion. Use four 5/16 x 1⁄" screws (B) and Allen
wrench to attach. (See Figure 3)
Figure 3
4. Align back cushion mounting plate with holes on
bottom of seat cushion. Use four 5/16 x 1½"
screws (A) and Allen wrench to attach.
(See Figure 4)
Figure 4
PAGE 2 OF 9
ASSEMBLY CONTINUED
C
C
FRONT
B
FRONT
A
FRONT
5. Slowly lower stool assembly onto gas lift. Press down
on seat cushion to secure. (See Figure 5)
Figure 5
1123 IH-11211