How to use the APP on your mobile phone
6. Function Introduction
Switch to Set parameters
Switch on/off Electric lock
(After switching to on, the
scooter will be self-locking when
the front wheel rotates less than
one circle and then stops)
The e-lock (function) will be
unlocked after the e-scooter is
powered off
Switch on/off The headlights
Show Driving distance
Show Current distance
7. Set parameters Screen
Back to the main
Show Bluetooth Equipment list
screen
Power on/off the scooter
Show Remaining power
Show the speed
Cruise control (When it is on, press and hold
the accelerator for 5-8 seconds and release it
after a beep is heard, and the scooter will
move forward at the highest speed in the
current speed mode)
Switch on/off Lateral illumination (only works
in Speed mode 2 and 3)
Lateral illumination are located on the both left
and right sides of the rear wheel
Switch Speed mode (the level of the green
light bar indicates the corresponding speed)
Speed mode 1
Speed mode 2
Speed mode 3
Show Total distance
EN-5
Switch for The headlights
Switch for Cruise control
Searching alarm on/off
Switch between km/h and
mph
Setting for Automatic
showdown time
Switch between Language