Publicidad
Idiomas disponibles
Idiomas disponibles
Important safety instructions--------------------------------------------EN
Disconnect the power supply whenever you proceed to the installation or repair
of the equipment
In compliance with the European Directive low-voltage electrical equipment, we hereby inform users of the following require-
ments:
•
For units which are permanently connected, an easily accessible circuit-breaker device must be built into the wiring sys-
tem.
•
This unit must always be installed in a vertical position and firmly fixed to the structure of the building.
•
This unit must only be handled by a specialised installer, by his maintenance staff or by a duly trained operator.
•
The instruction manual for this unit must always remain in the possession of the user.
•
Terminals of maximum section 3,8mm2 must be used for the power supply connections.
•
Do not open the device.
Use of the receiver
These receivers are designed for use as remote controls for directly activating 230V equipment (up to 10A).
The manufacturer reserves the right to modify equipment specifications without prior notice.
Technical data
230Vac–1000VA plug controlled by radio.
Frequency
Coding
Memory
Number of relays
Supply
Relay contacts
Consumption
Op. temperature
Watertightness
Size
868,35MHz
High security rolling code
30 codes
1 relays
230V ac (+/- 10%)
Max 32mA
-20ºC to +55ºC
IP22
58,5x104,50x50mm (without plugs)
jcmtechnologies
2
10A
Publicidad
