NEXPEAK NC202 Guia Del Usuario página 2

DANGER
READ AND UNDERSTAND ALL SAFETY INFORMATION BEFORE USING THIS PRODUCT.
Fallure to follow these safety Instructions may result In ELECTRICAL SHOCK, EXPLOSION,
FIRE, which may result in a SERIOUS INJURY, DEATH, or PROPERTY DAMAGE.
Electrical Shock. Product is an electrical device that can shock and cause
serious injury. Do not cut power cords. Do not submerge in water or get wet.
Explosion. Unmonitored, incompatible, or damaged batteries can explode if used
with product. Do not leave product unattended while in use. Do not attempt to
jump start a damaged or frozen battery. Use product only with batteries of
recommended voltage. Operate product in well ventilated areas.
Fire. Product is an electrical device that emits heat and is capable of causing
burns. Do not cover product. Do not smoke or use any source of electrical spark
or fire when operating product. Keep product away from combustible materials.
Eye Injury. Wear eye protection when operating product. Batteries can explode
and cause flying debris. Battery acid can cause eye and skin irritation. In the case
of contamination of eyes or skin, flush affected area with running clean water and
contact poison control immediately.
Explosive Gases. Working in the vicinity of a lead-acid is dangerous. Batteries
generate explosive gases during normal battery operation, To reduce risk of
battery explosion, follow all safety information instructions and those published by
the battery manufacturer and manufacturer of any equipment intended to be used
in the vicinity of battery. Review cautionary markings on these products and on
engine.
No-load Output Voltage
The no-load output voltage of NC202 battery charger will be 17.0- 17.8V while not connecting
to the battery or loads (measured from clamps directly with multimeter), it will turn to normal
charging voltage after being connected with the battery.
NOTE: Please remove the power plug from the socket when it's not in use for charging.
EN - 1