ChefLine CHVP388C Manual De Instrucciones página 9

Operation
Temperature setting and control (CAREL)
The front panel of the thermostat
1. Machine On/Stand -by (keep pushed)
2. Programming key (service agent only)
3. Manual defrost (keep pushed)
4. Defrosting light
5. Compressor operation light
How to turn the machine in ON / STAND -BY status

Press and hold the
How to unlock the keyboard (»Loc» message)

Push button for more than 3s, «PS» message will appear and the keyboard will be unlocked.
Note: For safety reasons the keyboard locks automatically after 60s of keys inactivity.
To execute any operation, please unlock the keyboard first.
How to see and modify the set point

Push and immediately release the

To change the set value push

To memorize the new set point value push the
Automatic defrost

The appliance will automatically run defrost cycles.
Note: The cycle starts from the time the appliance is initially powered up.
Manual Defrost:

Press and hold the

The defrost cycle will start immediately and the Defrost
Note: Starting a manual defrost also resets the automatic defrost timer.
GB
key for 3s, the machine will turn from ON to STAND -BY status and vice-versa.
key, the set point will be showed and starts blinking;
or arrows within 20s.
and button for 3s;
9
key again or wait 20s.
LED illuminates.
P2M032STD-Ver1.0