Publicidad
Idiomas disponibles
Idiomas disponibles
Method 1:
EN
Charging by the charger
Attention:
1. Connect the wireless desktop charger to your computer or other USB charging adapter via
the included USB-C cable.
2. Ensure that the product is switched off with the tail placed downward in the wireless desktop
charger; otherwise it can't be fully charged.
3. One of the indicator lights on the top of the camera will light up (lighting dimly) during
charging, and will light brightly after charging is completed. When charging via the comput-
er, make sure that the computer is powered on. If the camera status indicator is not on, try to
use another USB port with a power supply capacity of 5V/1A.
4. The charging base is not waterproof, so do not charge the battery with water; otherwise the
charger may be damaged. It takes about 3.5 hours to fully charge the battery. If you need
more information about battery maintenance, please refer to the Disclaimer and Safety
Tips.
Switching On and Off
Switch-On: Press the slide switch to the marked direction, hold the slide switch and slide it
towards the camera lens, the camera status indicator (yellow) will light up, then the camera will
beep for a few seconds, and the status indicator will flash and stay on, indicating that the
camera is switched on normally.
Switch-Off: Slide the switch to the tail of the camera to switch it off, and the indicators will all
go out.
Method 2:
Charging by the computer
Video Recording
A few seconds after the camera is successfully switched on, the status indicator will flash slowly
and the camera will beep twice, indicating that the video recording has been enabled automat-
ically. For segmented video recording, the default length of each segment is 3 min. You can
adjust the recording time by yourself on the APP.
Video resolution
Wi-Fi Connection
A few seconds after the camera is successfully switched on, the Wi-Fi will automatically turn on
for 5 min. If the phone is not connected to open the APP within 5 min, the Wi-Fi will enter the
sleep mode automatically. Enter the Wi-Fi connection interface of mobile phone/tablet PC, and
connect the Wi-Fi named "CCanFish_xxxxxx" without password.
* Special attention should be paid to the fact that since water can absorb a great number of
electromagnetic waves, when the antenna of the product is submerged into water, the Wi-Fi
signal will not be transmitted back to the mobile phone/tablet PC.
Control the Fishing CamX with Somatosensory
Operating Command
Switch on it, and swing horizontally and vertically
back and forth twice (as shown in the picture)
Optimal Purpose
Normally, the frame rate of 30FPS underwater can take
smooth and realistic images, and the captured images
can be shared on social media.
It is ideal for a variety of cases. If you need to take
slow-motion videos or smoother videos, you can use
60FPS mode, but the video will take up more space
accordingly in this mode.
Description
Enable or disable video recording
EN
Publicidad
