Publicidad
Idiomas disponibles
Idiomas disponibles
Before any maintenance or cleaning work, lay the
hedge trimmer down on a level surface, unplug the
power cord.
Check the blade condition and bolts for gaps, cracks or
other damage.
Check the cutting edges and sharpen with a flat file.
Warning:
▪ Keep the final edge sharp;
▪ Round the final end;
▪ Do not use water when sharpening.
You don't need to adjust the gap between the upper and
lower blade as this appliance was designed to have the
correct gap.
When assembling the blade, make sure you tighten the
spacer, washer and bolt, then tighten the nut.
Always keep the file or sharpener at a 45° angle to the blade
and always sharpen in the direction of the cutting edge.
Files sharpen in one direction only; lift the file off the
blade and do it again.
▪ Remove all debris from the edge of the blade with a
smooth sharpening stone;
▪ Try not to damage the blade too much;
▪ Before reinstalling the blade, apply grease;
▪ Do not attempt to sharpen a damaged blade: replace it
or return it to the dealer.
Storage
Preparing storage for long periods is vital to avoid problems
and increase the useful life of the hedge trimmer.
Cleaning
The hedge trimmer must be thoroughly cleaned after each
use. Remove any waste accumulated in the blade. Careful
handling protects the equipment and extends its service
life.
The packaging is made up of recyclable materials,
which you can dispose on local recycling points.
Never dispose of power tools with your household
waste!
According to the European Directive 2012/19/EC on
electrical and electronic equipment waste and its
transposition into national law, power tools must be
collected separately and delivered to the collection sites
provided for this purpose.
You can get information regarding the disposal of the power
tool through the person in charge for recycling in your city.
WhatsApp:
+351 967 817 569
E-mail:
support@vito-tools.com
Publicidad
