Montarbo MDI-2M Manual De Uso página 7

MDI-2M
CONTROL PANEL
FRONT PANEL
1 2 3
1 OUTPUT LEVEL
Turn this knob clockwise to set the general output level.
2 ON
This LED signals that the device is powered on and ready for use.
3 HEADPHONES LEVEL
Turn this knob clockwise to set the headphone listening level.
4 MONO
Press this switch to switch the input signal from stereo to mono.
5 AUX IN
Auxiliary stereo input with 3.5 mm mini jack connector.
6 PHONES
Headphone output with 3.5 mm mini jack connector.
12
6 7 9
4 5 8
7 RCA IN
Input for unbalanced audio signals on RCA connector. The electrical connections are:
TIP = + positive ("hot")
SLEEVE = shield/ground
8 AUDIO IN
Connect the USB-C cable supplied to start audio streaming from your computer, laptop
or mobile device. This connection does not supply power to the unit.
9 USB POWER IN
To power the unit, connect the USB-C cable supplied to a computer or to a power outlet
socket. This connection does not allow audio streaming.
N.B.: use an eternal power supply with minimum output 5V 2A.
REAR PANEL
10
12
User manual
11
10
13