MESTIC Power Station MPS-1800 Instrucciones De Uso página 22

LED lights
Short-press the LED light button to switch between four modes: low light, medium light, bright light, SOS and
light off.
12V DC output
Short press the 12 DC output power switch
11. After the main power switch is turned on, press the 12V DC output power switch to enable the DC output
port.
12. Press the 12V DC output power switch again to turn it off.
13. When the 12V DC output power switch is turned on, the power station does not shut down automatically.
14. Note: Long-press the ON/OFF button to restart the BMS and clear the fault information.
AC charging
Quick charging technology is designed for AC charging. You can control the charging power via the AC charging
speed switch. The slow charge mode is on by default when the power station is turned on and can be switched
to quick charge mode by pressing the button. Quick and slow charging mode switching can also be set via the
app. If the current is continuously higher than 20A, the charging input port will activate the self-protection
function, and the charging overload protection switch will automatically trip. Press the charge overload
protection switch to restore charging after confirming no faults.