Kenwood SW-700 Manual De Instrucciones página 6

Connections
a yy is
Before connection:
1.Set the POWER switches of the amplifier and Super Woofer to OFF. If they are connected with the
POWER switch(es) left ON, one or both of them may be damaged.
2. The connection method varies depending on whether or not the amplifier is equipped with a Super
Woofer Pre-Out jack. Be sure to check if your amplifier is provided with such an output jack.
M If the amplifier is equipped with a Super Woofer
Pre-Out jack
Using the supplied pin-plug cord, connect the RCA-type pin-
plug jack, labeled INPUT, on the Super Woofer to the Super
Woofer Pre-Out jack on the amplifier.
Amplifier
SW-700
Super Woofer
Front speaker {R) Front speaker (L)
(REARISPEAKERS
{82 OR MORE}
Supplied pin-plug cord
To AC outlet
Rear surround
speaker (L)
Rear surround
speaker (R)
6 sw-700 (En)