Sagem Photo Easy Manual Del Usuario página 13

Liasse azur PE270.fm Page 1 Mardi, 18. juillet 2006 5:22 17
W
ELCOME
Thank you for purchasing our new photo printer. With this high quality printer you can get the most out of
your digital photos. The Crystal Image and red-eye image optimising functions provide faultless print and
copy quality of your photos.
You will also find the following on the web site www.sagem.com:
• print drivers for PCs,
• a list of answers to frequently asked questions (FAQ).
A detailed user guide is supplied on the CD-ROM.
S
AFETY INSTRUCTIONS AND RECOMMENDATIONS
Do not install your photo printer in a humid room (bathroom, laundry, kitchen, etc.), or within
1.50 m of a tap or water source, or outside. The printer should be operated within an ambient
temperature range of 10°C to 35°C. Your printer should be used at an ambient temperature of
between 15°C and 35°C for optimum printing results.
Do not set up your printer in a dusty environment as dust deposits might adversely affect the print
quality of your photos.
Only use the power supply that is supplied. Connect it to a mains outlet in compliance with the
installation instructions in this booklet and the indications stated on the identification label located
on the unit (voltage, current and frequency of the electricity network). As a precaution, in case of
danger, the mains adapters act as a disconnecting mechanism for the 230V power supply. They
should be placed near the device and should be easily accessible.
Never open the top cover when the printer is operating, as you risk breaking the film that may
result a printer malfunction.
After using the printer, wait a few moments after switching the printer off before opening it. To
avoid injury, never touch the print head.
Only use SAGEM consumables, if not you are likely to damage the equipment and invalidate the
guarantee.
The crossed-out waste bin stuck on the product means that the product belongs to the family of
electrical and electronic equipment.
In this respect, the European regulations ask you to dispose of it selectively:
- At sales points in the event of the purchase of similar equipment.
- At the collection points made available to you locally (drop-off centre, selective collection, etc.).
The CE marking certifies that the product meets the main requirements of the European
Parliament and Council directive 1999/5/CE on telecommunications terminal equipment,
regarding safety and health of users, and regarding electromagnetic interference.
The declaration of compliance can be consulted on the site www.sagem.com category "support",
or can be requested at the following address:
4, rue du Petit Albi - 95800 Cergy Saint-Christophe - FRANCE
Sagem Communication - Customer relations department
- 1 -
E
NGLISH