Descargar Imprimir esta página

AENO VS2 Guia De Inicio Rapido página 9

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 119
wipe dry. Do not use harsh detergents, abrasive pastes, polishes or detergents
containing acids or solvents. Use "Moist" mode only for products with a small
amount of liquid. Do not vacuum liquid food, it is only suitable for sealing. Use
only special bags for vacuum sealers. The adapter (vacuum hose) supplied with
the vacuum sealer is only used to evacuate air from special vacuum containers.
It is recommended to dry wet foods with a clean towel or cloth before
vacuuming. Before putting vacuum-packed foods into microwave, make a
hole in the package or open the outlet valve in the container to release steam.
Use only manufacturer-recommended accessories, consumables and/or
replacement parts. For more information see the full manual available for
download at aeno.com/documents. After use the device should be left to cool
down. During storage in order not to deform the seal (12) and thus not to impair
the performance of the device, it is recommended to close the cover loosely
without locking the locks (8). Do not allow children to use and/or play with the
device.
Device control
Automatic vacuuming and/or sealing of packages
1. Connect the device to a power source by connecting the power cord to the
device and then plugging the power cord into a power outlet.
2. Place the food in a vacuum bag. Gently secure the open edge of the bag with
bag clips (7) (see Fig. B).
3. Press lightly on both sides of the cover. After a characteristic click both
fasteners (8) will close automatically.
4. Select Mode. To switch between modes, press the "Dry/Moist" button (1) on
the device body. The "Dry" mode corresponds to the blue indicator (6) on the
control panel and the "Moist" mode corresponds to the red one.
5. Press the "Vac Seal" button (3) on the unit to start the vacuuming and sealing
process or the "Seal" button (4) to start the sealing process only.
6. When sealing is complete, the light on the control panel will turn off and then
after a few seconds it will start blinking again.
7. Press the buttons (15) on the device at the same time, the cover will open
automatically.
aeno.com/documents
9

Publicidad

loading

Productos relacionados para AENO VS2

Este manual también es adecuado para:

Vs2-ukAvs0002Avs0002-uk