Descargar Imprimir esta página

Hilti KCF 4-22 Manual De Instrucciones Original página 17

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 51
▶ No one is permitted underneath the product when it is mounted overhead. A falling product could result
in serious personal injury or property damage.
▶ When the product is suspended by the hooks, do not shake the product or the object from which it is
suspended.
▶ Do not suspend the product from electric wires or anything that is not secure. Personal injury or property
damage could occur.
▶ Make sure that the product is mounted on a firm, smooth surface when secured by the keyhole slots and
make sure the screw heads are fully seated in the keyhole slots.
▶ Do not attempt to install the product on the ceiling.
▶ The hooks are not designed to support additional weight. Do not attach or hang anything on the fan as
otherwise breakage can occur. Do not, under any circumstances, use the hooks to support your weight
or other things.
▶ Store the product and the batteries in a cool and dry place. Comply with the temperature limits stated
in the technical data. Do not use the product in bathrooms or other rooms with high temperatures, high
humidity.
▶ Do not expose the product to high temperatures or fire. Do not bring the product near stoves or other
heat sources. To reduce the risk of fire, do not place items of clothing or other flammable materials over
the product when it is in use.
▶ Do not use the product as a blower; avoid prolonged contact with dust.
▶ If unusual sounds, smells or other abnormalities are perceptible, switch the product off immediately.
▶ Do not allow water to get inside the product. Do not immerse the product in water or in any other liquid.
▶ Do not use cleaning agents or chemicals on non-metallic parts of the product. Use of these chemicals
can weaken the plastic parts. If cleaning is necessary, use only a slightly damp cloth with soapy water.
▶ For this product, use only Hilti Nuron lithium-ion batteries of the B 22 series.
2.2
Careful handling and use of batteries
▶ Comply with the following safety instructions for the safe handling and use of Li-ion batteries.
Failure to comply can lead to skin irritation, severe corrosive injury, chemical burns, fire and/or explosion.
▶ Use only batteries that are in perfect working order.
▶ Treat batteries with care in order to avoid damage and prevent leakage of fluids that are extremely
harmful to health!
▶ Do not under any circumstances modify or tamper with batteries!
▶ Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over 80 °C
(176 °F).
▶ Never use or charge a battery that has suffered an impact or been damaged in any other way. Check
your batteries regularly for signs of damage.
▶ Never use recycled or repaired batteries.
▶ Never use the battery or a battery-operated power tool as a striking tool.
▶ Never expose batteries to the direct rays of the sun, elevated temperature, sparking, or open flame. This
can lead to explosions.
▶ Do not touch the battery poles with your fingers, tools, jewelry, or other electrically conductive objects.
This can damage the battery and also cause material damage and personal injury.
▶ Keep batteries away from rain, moisture and liquids. Penetrating moisture can cause short circuits,
electric shock, burns, fire and explosions.
▶ Use only chargers and power tools approved for the specific battery type. Read and follow the relevant
operating instructions.
▶ Do not use or store the battery in explosive environments.
▶ If the battery is too hot to touch, it may be defective. Put the battery in a place where it is clearly visible
and where there is no risk of fire, at an adequate distance from flammable materials. Allow the battery to
cool down. If it is still too hot to touch after an hour, the battery is faulty. Consult Hilti Service or read the
document entitled "Instructions on safety and use for Hilti Li-ion batteries".
Observe the special guidelines applicable to the transport, storage and use of lithium-ion batteries.
Read the instructions on safety and use of Hilti Li-ion batteries that you can access by scanning
the QR code at the end of these operating instructions.
*2419422*
2419422
English
15

Publicidad

loading

Productos relacionados para Hilti KCF 4-22