Candy CSO4474TWMB6/1-S Manual Del Usuario página 68

WARNING:
don't touch the buttons while inserting
the plug because
calibrates the systems during the first
seconds: touching the buttons, the
machine couldn't work property. In
this case, remove the plug and repeat
the operation.
PROGRAMME selector with OFF
position
When the programme selector is turned

the display lights up to show the settings
for the programme selected.
Switch off the washing machine by

turning the selector to OFF.
First starting
- Language setting
After connecting the machine to the

network and turning it on, press the
"TEMPERATURE
"SPIN SPEED" button to display the
available languages.
Select the desired language pressing the

PLAY/PAUSE button.
- Change the language
If you want to change the setting language,

you will have to press simultaneously
"TEMPERATURE
"DELAY START" buttons for about 5
seconds. ENGLISH will appear on the
display, and you will be able to choose a
new language
"TEMPERATURE SELECTION" or "SPIN
SPEED" button).
Press PLAY/PAUSE button to confirm

your choice.
PLAY/PAUSE button
Close the door BEFORE selecting the
button PLAY/PAUSE.
the machines
SELECTION" or
SELECTION"
and
(by pressing
To start the selected cycle with the preset

parameters, press PLAY/PAUSE. When
the programme is running, the display will
show the time to elapse.
Moreover, If you want to modify the

chosen programme, press the desired
options buttons,
parameters
PLAY/PAUSE button to start the cycle.
Only the options compatible with the
set programme can be selected.
After switching on the appliance, wait a

few seconds for the programme to start
running.
PROGRAMME DURATION
When a programme is selected the

display automatically shows the cycle
duration, which can vary, depending on
the options selected.
Once the programme has started you will

be kept informed constantly of the time
remaining to the end of the wash.
The appliance calculates the time to the

end of the selected programme based
upon a standard loading, during the cycle,
the appliance corrects the time to that
applicable to the size and composition of
the load.
PROGRAMME END
When the

programme is finished and the DOOR
LOCKED indicator light has gone out, the
door can be opened.
At the end of the cycle, switch off the

appliance by turning the selector to OFF.
The programme selector must be
returned to the OFF position at the end
of each cycle or when starting a
subsequent wash cycle prior to the next
programme being selected and started.
68
modify the
and then
display shows that
default
press
the