HOMCOM 853-016 Serie Manual Del Usuario página 4

Figure 1
Individual type ironing machine is offered with ironing board and its installation is
as follows.
Align the slot position
and press downward
Installation is as the
figure below
Figure 3
Figure 4 Figure 5
5. If the ironing or brushing of the ash layer is filled with a brush head
(optional), the brush head is mounted on the steam hose nozzle as
shown in the diagram, and then the steam hose nozzle is placed on
the hook.
If you press other fabrics, please do not install the brush (Figure 6)
Figure 6
Figure 7
Installation steps
1. The telescopic
aluminum rod inserted
into the telescopic
aluminum rod fixed
frame as shown in
Figure 1.
3. Open the two lock button (see Figure 3)to pull the telescopic
aluminum rod. The three telescopic aluminum rods can be pulled
out and adjusted to the proper position.
Press the button (see Figure 4).
4. Insert the steam hose into the main steam outlet as
shown in Fig.5 and press the steam hose in a clock
wise direction to secure the twist.
6. Turn the water tank knob counterclockwise(Fig.7)
and clean the cold water in the tank.
Turn the water tank knob clockwise as shown in
Figure 8
Figure 8
Figure 2
3
2. Install the steam
nozzle and the
clothes hook and the
clothes hanger
downward as shown
in (Figure 2)
Installation is as
the figure below
Installation is as the
figure below