Publicidad
Idiomas disponibles
Idiomas disponibles
BURNERS
They can be removed and washed with
soapy water only.
They will remain always perfect if
cleaned
with
silverware.
After cleaning or wash, check that
burner-caps and burner-heads are dry
before placing them in the respective
housings.
Note: To avoid damage to the electric
ignition do not use it when the
burners are not in place.
C
F
Fig. 6.1
118
products
used
S
CORRECT REPLACEMENT OF THE
BURNERS
It is very important to check that the
burner flame distributor F and the cap C
for
has been correctly positioned (see fig.
6.1-6.5) - failure to do so can cause
serious problems.
Check that the electrode "S" (fig. 6.1) is
always clean to ensure trouble-free
sparking.
Fig. 6.2
A
B
Fig. 6.3
Publicidad
