Maintenance, Accessories - WIKA IL-10 Manual De Instrucciones

Sonda de nivel de seguridad intrínseca
Ocultar thumbs Ver también para IL-10:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

7. Starting, operation
Specifications
Model IL-10
Storage
3)
Also complies with EN 50178, Tab. 7, Operation (C) 4K4H, Storage (D) 1K4,
3)
Transport (E) 2K3
Other temperature ranges are possible, depending on the electrical connection;
4)
see EC-type examination certificate and table page 13)
Compensated temp range
Temperature coefficients within
compensated temp range
Mean TC of zero
% of span
Mean TC of range
% of span
Ex-protection
ATEX
Ignition protection type
Ex-protection
FM, CSA
Ignition protection type
Read the operating conditions and safety-relevant data in the EC-type
5)
examination certificate in any case (DMT 00 ATEX E 045 X)
CE- conformitiy
EMC directive
ATEX-Directive ATEX of equip-
ment intended for use in potenti-
ally explosive atmospheres
Approval German Lloyd GL
RF-immunity
V/m
Burst
kV
Wiring protection
Short-circuit proofness
Reverse polarity protection
1
WIKA Operating instructions/Betriebsanleitung/Mode d'emploi/Instrucciones de servicio
{-10 ... +85°C with FEP-cable}
{-14 ... +185 °F with FEP-cable}
-10 ... +60 °C
-14 ... +140 °F
0 ... +50 °C
32 ... +122 °F
0.2 / 10 K (< 0.4 for pressure range ≤
250 mbar)
0.2 / 10 K
Category
5)
1G (IIA), 1/2 G, 2G, 1D, 1/2D, 2D, M1, M2
EEx ia I/II C T4, EEx ia I/II C T5, EEx ia I/II C T6
Class I, II and III
Instrinsic safe Class I, II, III Division 1,
Group A, B, C, D, E, F, G and Class I, Zone 0 AEx ia II C
2004/108/EEC, EN 61 326 Emission (Group 1, Class B) and Immunity
(industrial locations)
94/9/EC
Environmental Category C, F, EMC 1
10
4
Sig+ towards UB-
UB+ towards UB-
GB
7. Starting, operation / 8. Maintenance, accessories
Specifications
Weight
»
Cable
{ } Items in curved brackets are optional extras for additional price.
Permissible temperature ranges depending on electrical connections
Electrical connections
PUR-cable
FEP-cable
Functional test
The output signal must be proportional to the pressure. If not, this might point to a
damage of the diaphragm. In that case refer to chapter 9 „Troubleshooting".
Observe the ambient and working conditions outlined in section 7
„Technical data.
Please make sure that the level probe is only used within the over load
Warning
threshold limit at all times!
When touching the level probe, keep in mind that the surfaces of the instru-
ment components might get hot during operation.
Caution

8. Maintenance, accessories

WIKA level probes require no maintenance.
Have repairs performed by the manufacturer only.
Accessories: For details about the accessories, please refer to WIKA's price list, WIKA's
product catalog on CD or or contact our sales department.
IL-10
WIKA Operating instructions/Betriebsanleitung/Mode d'emploi/Instrucciones de servicio
Model IL-10
kg
Approx. 0.2
kg
Approx. 0.08 per m cable
Ambience-/ Medium tempera-
Category
ture range
1 G (IIA), 2 G (IIA), M1, 1 D, 2 D
-10 ... +60 °C
1 G (IIA)
-30 ... +60 °C
2 G (IIA), M1
-30 ... +105 °C
1 D, 2 D
-30 ... +80 °C
GB
14 ... +140 °F
-22 ... +140 °F
-22 ... +221 °F
-22 ... +176 °F
1
IL-10

Publicidad

Tabla de contenido
loading

Tabla de contenido