PNI SafeHome PT101L WiFi Manual De Usuario página 4

» In your mobile phone, activate the Location and
Bluetooth functions.
» Open the application, create an account and log in.
» Add your device by pressing the + icon in the upper
right corner of the screen or by pressing the Add device
button.
» Check that the LED of the switch is red and blinks
quickly. If it does not blink, hold down the button for
about 10 seconds until the LED starts to blink. Now the
switch is in pairing mode.
» The application will identify your device. Press the Add
button.
» In the following interface, input the Wi-Fi network
password.
» Wait for the application to configure your device.
» When your switch has been added, the LED on the
switch will stabilize and turn blue.
» Click the Done button to complete the configuration
procedure.
From your Tuya app, you can turn the lights on and off,
you can set an hour for the lights to turn on and off
automatically, and you can share the smart switch with
other family members.
EN-3