3.5 To change gear, rotate the accelerator
twistgrip back to zero, press the clutch
lever and turn the gearchange twistgrip
control and position it on the next upper or
lower gear.
3.6 Use indicator switch button for turning and
use horn whenever required.
ENGINE RUNNING-IN
Operation: The most important period in the life of
your scooter is its first 1000 kms. The engine is
brand new and different moving parts of the engine
need to be set to their correct operating tolerances.
This ensures a longer life for your vehicle. It is
therefore necessary to take some precautions so as
not to overload the engine.
1.
Keep to the following speed limits
1st Gear
:
0 to 10 kms/hr.
2nd Gear
:
10 to 20 kms/hr.
3rd Gear
:
20 to 35 kms/hr.
4th Gear
:
35 kms/hr and above.
2.
Avoid running the scooter on full accelerator
(throttle) for long periods. Vary the speed
from time to time.
STAR DLX ENGLISH 12-5-2010
4. APPLICATION OF BRAKES:
4.1 Turn the accelerator twistgrip back to zero.
4.2 Press the clutch lever and change the gear
to the neutral position.
4.3 Use foot pedal brake and hand brake
simultaneously for the most efficient
braking.
STAR DLX ENGLISH 12-5-2010
3.
Do not drive with half (partially engaged)
clutch. This will not only damage the clutch
but will also cause overheating of the engine.
4.
Allow a cooling off period of 5-10 minutes
after each hour of use.
5.
Ensure oil level in engine to recommended
level, by checking the level with the help of
dipstick.
Operating the vehicle
28
Runningin-in-Instructions
29