Kingfisher 3663602497011 Manual Del Usuario página 4

Troubleshooting
If the light chain fails to light, please check the following:
• Disconnect the set from the mains.
• Check that the jack plug on the light chain is connected to the transformer.
WARNING:
• Do not connect the light chain directly to the mains. Use only with the
supplied transformer.
• Do not connect this light chain electronically to another light chain.
• Do not connect this light chain to a power supply while it is in the packaging.
• The light source of this luminaire is not replaceable: when the light source reaches
its end of life the whole luminaire shall be replaced. DO NOT attempt to replace
the non-replaceable bulbs in this light chain.
• Take care not to damage the cable or fittings.
• The external flexible cable or cord of this luminaire cannot be replaced. If part of
the light set of the cord is damaged, the luminaire MUST be destroyed.
• This product is for use as a decoration only. Not to be used by children as a toy.
Keep out of reach of small children.
• Please refer to the packing or product rating label for product class, specifications
and rating.
• DO NOT pierce the cable when securing in place, bend or stand on the light chain,
as this will damage the bulbs or wiring.
MAN128-02 LED light strings (basic) plug GroupM1 R.indd 4
4
16/05/2019 15:12