Manual for Doctor mode (for physician or licensed practitioner use only)
It.is.possible.for.a.physician.or.licensed.practitioner.to.see.the.compliance.meter,.to.reset.the.compli-
ance.meter.or.to.lock/unlock.the.treatment.parameters..This.is.achieved.using.doctor.mode.
1...Enter. to. Doctor. mode:. Press. and. hold. on. 'TIME'. key,. then. turn. on. the. unit. with. channel. 1/2.
knob..If.you.can.see.the.'hr'.symbol.show.on.the.LCD.(the.rate.is.0.Hz),.you.are.in.the.doctor.
mode..(Some.model.with.'min'.symbol)
2...See.Compliance.meter.value:.After.you.enter.the.doctor.mode,.the.compliance.
.
meter.value.is.showing.on.the.LCD.with.'hr'.symbol..(Some.models.with.'min'.symbol).
3..Reset.the.compliance.meter.value:.When.the.doctor.want.to.reset.the.compliance.
.
meter's.value.for.a.new.treatment.cycle,.you.can.do.as.the.follow.steps:
.
When.you.are.in.the.doctor.mode,.press.'MODE'.key.first,.then.press.the.reset.key..Thus,.the.
value.will.be.reset..
.
*reset.key:.'Rate.▼'.for.TENS/EMS/Combo/IF/HV;..'▼'.for.EMS.(C)..
Appendix
27
English