Operation; Light Guide Connection; Start-Up Procedure; Light Intensity Setting - SCHOTT KL 1500 LCD Instrucciones De Uso

2 Operation

2.1 Light guide connection

First open the light guide socket (2) by
turning the outer black ring in a coun-
ter-clockwise direction. Push the light
guide in as far as the stop and close
the light guide socket.
Caution:
When inserting light guides with a
location pin, care must be taken to
ensure that the latter fits into one of
the four clamping clip slots.
15

2.2 Start-up procedure

Switch on/off by operating the mains
switch (1).
Position :
The instrument is switched off.
Position I :
The instrument is switched on.
To protect the halogen lamp the
KL 1500 LCD is fitted with a gentle
start-up device that reduces the high
switch-on current that would otherwise
occur. In addition, electronic stabilisati-
on of the lamp voltage ensures stable
light power regardless of fluctuations in
the mains voltage.

2.3 Light intensity setting

The KL 1500 LCD is fitted with two
independent alternative means to ad-
just the light intensity.
The stepless electronic adjustment enab-
les you to optimise the lamp lifetime -
by precisely setting the brightness you
require, you will achieve the longest
halogen lamp lifetime that is possible
for your application. This also varies the
color temperature of the emitted light.
The mechanical adjustment enables
stepless variation of the light intensity
at a constant color temperature.