SCHOTT KL 1500 LCD Instrucciones De Uso página 21

Properties
Electrical information
Operating voltage,
frequency
230 V version
120 V version
Electronic stabilisation of the lamp
voltage (working range: specified
operating voltages ± 10 %)
Power consumption, max.
Fuses, primary
230 V version
120 V version
Protection class
Overvoltage category
Lamp type
Lamp rated voltage
Lamp rated power
Average lamp lifetime
Level 4
Level 5
Level 6
Lighting information
Maximum effective
light guide bundle diameter
Total light flux at light guide exit
(SCHOTT light guide, Ø 8 mm, typ. values)
Level 4
Level 5
Level 6 (max. light flux)
Light entry angle (2α eff )
swing-in optics in/out of position
Heat protection filter
Approvals
230 V version
120 V version
The KL 1500 LCD has been tested and certificated to the applicable standards on electrical
laboratory equipment (DIN EN 61010-1 and UL 3101-1), and electrical medical equipment,
DIN EN 60601-1 and/or UL 2601-1. This enables manufacturers to obtain easy approval with
integration of the KL 1500 LCD into their medical products.
Further standards are listed in the EC Declaration of Conformity on page 3 of this brochure.
The 230 V version features .
The right is reserved to make changes in the design and supplied items within the scope of on-going technical development.
Values
220 ... 240 V ~ 50/60 Hz
100 V ~ 50/60 Hz and
120 V ~ 60 Hz
± 1.5 % of the set lamp
voltage (true RMS value)
W 200
- T 2 H, 250 V in accordance with
IEC 127-3/5
- T 4 A in accordance with UL 198 G
- II
- II
- Halogen reflector lamp
Philips, Type 6423
Philips, Type 6423 XHP
Osram, Type HLX 64634
V 15
W 150
h 1500
h 150
h 50
mm 9
lm 250
lm 500
lm 600
degrees approx. 53/72
- SCHOTT KG 2, 45 x 45
thickness = 2,0 mm, toughened
-
GB
20