Publicidad
Idiomas disponibles
Idiomas disponibles
11 CLEANING AND MAINTENANCE
Attention !Before performing any work on the equipment, pull the power
plug.
11.1
Cleaning
▪
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
▪
Regularly clean the machine housing with a soft cloth, preferably after each use.
▪
Keep the ventilation slots free from dust and dirt.
▪
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
11.2
Lubrication
From time to time, apply a drop of oil to the thread of the lock screw.
12 TECHNICAL DATA
Rotation speed
Blade size
Max cutting depth
Rated voltage DC
Maximum cutting capacity 90°- 90°
Maximum cutting capacity 45°- 90°
Bore size
Adjustable angle
Number of teeth
Soft grip
LED work light
13 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
Acoustic power level LwA
ATTENTION! The sound power level may exceed 85 dB(A), in this case
individual hearing protection shall be worn.
aw (Vibration)
14 SERVICE DEPARTMENT
▪
Damaged switches must be replaced by our after-sales service department.
▪
If the connecting cable (or mains plug) is damaged, it must be replaced by a particular
connecting cable which is available from our service department. Replacement of the
connecting cable must only be carried out by our service department (see last page) or by
a qualified person (qualified electrician).
Copyright © 2022 VARO
POWDP25230
-1
4000min
185mm
62mm
40V
62mm
42mm
20mm
Yes
24T
Yes
Yes
82dB(A)
93dB(A)
3,4 m/s²
P a g e
| 11
K = 1.5 m/s²
www.varo.com
EN
Publicidad
