Publicidad
Idiomas disponibles
Idiomas disponibles
3. Extension cord
When the work area is removed from the power source, use an extension cord of sufficient thickness and rated capacity.
The extension cord should be kept as short as practicable.
1. Switch operation
2. Operate this demolition hammer by utilizing outside force. The performance will be better if it is pressed or thrusted with
properly force against the work surface.
Note: Sometimes the power tool does not begin the striking the stroke even the motor keep running, because oil inside
become thick. If the power tool is used at a low temperature, or it is used after a long idle time, this demolition hammer
should be kept running for above 5 minutes to warm up.
5. Maintenance
Before do any maintenance, ensure unplug the plug.
GREASE AND OIL FILLING
Demolition hammer mechanical part is easy to get worn and lose impact energy if without enough lubrication, recommend
filling grease and oil after 6 months usage. The steps as follows:
KEEP WORKiNG
KEEP WORKiNG
Keep Working
Keep Working
09
01
D H
7 5 3 1
Publicidad
