Publicidad
STEP 26
Be sure the light plug wires (24d) are
secure in the wire saddle (20) located on
Upper Back Panel (E).
Do NOT cut into bed
There are notches provided at the
back of your unit. These notches are
to fit around the baseboard on your
wall. If your baseboard is higher or
thicker than the notches provided on
the unit, you will need to remove the
baseboard, cut it down to fit on both
sides of your unit, then refasten to
the wall.
ameriwoodhome.com
With the help of another person, place
your unit FLUSH against the wall
wire saddle (20)
!
37
E
Publicidad
