Publicidad
STEP 35
1. With a person on each side, carefully lift
the bed frame in the closed position.
2. While one person pushes the bed frame
into the cabinet, passed the 90 degrees, the
other person is to engage the "front" Gas
Piston (20h) on each side of the unit, to the
front pin of the Left and Right Pivot Arm
(20e & 20f).
3. Then tightly secure with two Nuts (20r).
4. To engage the "rear" Gas Piston (20h) on
each side of the unit, slowly and carefully
wiggle the bed frame back and forth until
you can insert the Gas Pistons (20h) onto
the rear pin of the Left and Right Pivot Arm
(20e & 20f).
5. Then tightly secure with two Nuts (20r).
20e
20r
20r
20h
ameriwoodhome.com
20r
(x4)
20f
20r
20r
20h
47
20t
(x1)
push here
into cabinet
this step is continued
on next page...
Publicidad
