Publicidad
Idiomas disponibles
Idiomas disponibles
3.1.
Device description
3.2.
Assembling the device
We suggest installing the barber pole under some sort of cover, such as a roof or eaves. Keeping it out of
the rain and strong sunlight can extend its life.
1.Make sure that the barber pole works well before installation.
2. Electric drill is needed to drill holes for the dowels.
3.First install the upper bracket. Make sure it's perpendicular to the plane.
4. Second, measure out the distance "d"----the distance between the two holes on the wall mount.
5. Then you can use a string to help you to confirm the position of the other bracket. Tie the string to the
screws of the two brackets, make the length of the string between those two screws equal to "d". Then let
the under bracket go and it will find its position. This can not only make sure the distance of the bracket is
right, but also perpendicular.
EN
1 – LED bulb
2 – Bulb socket
3 – Bulb socket mounting rings
4 – LED power supply
5 – Wall mount
6 – LED lamp
7 – Inner rotating cylinder
8 – Outer cylinder
9 – ON/OFF switch
10 – Power cord
11 – Bottom bowl
Publicidad
