Publicidad
Idiomas disponibles
Idiomas disponibles
EN
2. Connecting to a network
- You will need a network connection for "Internet Radio" and "Music Player" operating modes.
- You will need either a router and RJ 45 cable or a WLAN router together with the required password
to establish a connection to your network.
- Your router must have a broadband internet connection for "Internet Radio" operation and to perform
software updates.
- When you select "Internet Radio" or "Music Player" modes, your device will try to connect to a network.
If this is the first time that a connection has been made or stored network are not accesible, the the
"Network Wizard" will start. To start the "Network Wizard" manually, select the following:
MENU > System settings > Network > Internet Wizard
Using this function, the device will search an operative network, asking us about:
- WLAN region ( select a country or region from the list)
- Network name (select the desired network)
- An encrypted wireless network will require a password.
Use the navigation button or the dial encoder to move the cursor through the displayed fuctions.
Inside Network function you can also select:
2.1 Internet Wizard
2.2 PBC Wlan setup: Allow to setup a PBC (Push Button Configuration) Wlan connection. Follow the
displayed instructions.
2.3 View setting: After setup the network, this function offers informations about Active connection, MAC,
DHCP state, SSID, etc.
2.4 Wlan Region: Allows to select a country/region
2.5 Manual setting: Allows to setup the network configuration manually. You can select Wired or Wireless
network, modifying all parameters. Follow the displayed instructions.
2.6 Network Profile: All configurated network can be stored here and to select it again without setup it
again.
9
User Manual/Manual de Uso
MULTIPLAYER 10 WEB
Publicidad
