Publicidad
Idiomas disponibles
Idiomas disponibles
2.5 Manual Setting
If you need to setup the network connection manually, please, follow the next instructions:
In MENU > System settings > Network > Manual Setting
1. Select the preferred connection type:
Wired (via cable) or Wireless (via wireless network).
The following options are common in both connection types.
2. Select if the Direct Host Configuration Protocol (DHCP) is to be used:
DHCP enable > Activates use.
DHCP disable > Desactivates use
.
6. SSID
Set the Network Host Name. Use the
compose the correct name. Select BKSP in the display to delete a mistake. When you finish select
OK in the display.
7. Authentication
Set the preferred method of authentication
Open, PSK (Pre-Shared Key), WPA (Wi-Fi Protectred Access) or WPA2. Press SELECT to
continue.
8. Encryptation Type
Set the appropriate type. It depends on the previous Authentication selection:
Disabled & Wired Equivalent Privacy (WEP) for Open and PSK type
Temporal Key Integrity Protocol (TKPI) or Advanced Encryption Standard (AES) for WPA & WPA2.
9. Key
Now, enter the wireless network code. Use the
and to compose the correct password. Select BKSP in the display to delete a mistake. When you
finish, select OK in the display.
NOTE: If you have any doubt about network configuration, please, contact with your network
administrator to choose the adequate configuration.
key or encoder to select the letters and to
key or encoder to select the characters
10
User Manual/Manual de Uso
EN
MULTIPLAYER 10 WEB
Publicidad
