Electromagnetic Compatibility (Emc) - Irwin EM50 Instrucciones De Funcionamiento

PRECAUTIONS:
Only use this product as a measuring sensor, not as a controlling device.
Your system must be configured and operated: Watch out for errone-
ous distance in such a way, that in case of an erroneous measurement,
malfunction of the device or power failure due to installed safety mea-
sures(e.g. safety limit switch), it is assured that no damage will occur.
WARNING:
Flat batteries must not be disposed of with household waste. Care for
the environment and take them to the collecting points provided in accor-
dance with national or local regulations.
The product must not be disposed of with household waste.
Dispose of the product appropriately in accordance with the national reg-
ulations in force in your country.
Always prevent access to the product by unauthorized personnel.
Technical Support: Local dealer
Electromagnetic Compatibility(EMC):
The term"electromagnetic compatibility" is taken to mean the capability of the
product to function smoothly in an environment where electrostatic discharges are
present, and without causing electromagnetic interference to other equipment.
CAUTION:
The product conforms to the most stringent requirements of the relevant
standards and regulations. Yet, the possibility of it causing interference
in other devices cannot be totally excluded.
WARNING:
Never attempt to repair the product yourself. In case of damage, contact
the local dealership.
36 | English