Publicidad
Idiomas disponibles
Idiomas disponibles
Installation and connection
B
• Diverse installation options, e.g. in gardens, garden ponds or decorative
fountains. Connectors and adapters are not required.
– Suitable for installation on the nozzle pipe of a fountain pump.
(→ Installation on nozzle extension)
• Position the transformer at least 2 m from the edge of the pond.
• Position the unit in such a way that it does not present a hazard to anyone.
Installation on nozzle extension
C, D
The connector and an adapter are required for fastening the unit on a nozzle
extension. The diameter of the nozzle extension determines which adapter is
required.
How to proceed:
1. Insert the desired adapter in the LED ring from below and push it all the way
into the LED ring.
2. Position the clamping ring and push until the three hooks engage in the
clamping ring.
– The adapter is fastened in place by the clamping ring.
Connect the unit
E
• Connect the connection cable of the LED light ring with the socket on the
power pack and hand-tighten the union nut.
Commissioning/start-up
NOTE
The unit will be destroyed if it is operated with a dimmer. It contains sensitive
electrical components.
Do not connect the unit to a dimmable power supply.
• Switching on: Plug the power plug into the outlet.
– The unit switches on immediately.
• Switching off: Pull the power plug from the outlet.
- EN -
15
Publicidad
