Sebson SET 4 UNDER Manual Del Usuario página 5

General safety information:
Danger:
In case of damages or contact with water turn off this product immediately without tension and make sure
that a restart is no longer possible!
Danger of suffocation:
that can be swallowed!
Caution:
Set up the light beam of the light never directly at people or animals to prevent fire damage or eyes
damage and avoid looking directly into the light source!
▪
The remodeling of this product is not allowed! The proper and safe functioning of the device can no longer
be guaranteed if it is modified! In addition, this will invalidate the warranty claim!
▪
Do not connect a dimmer as this may cause a damage to the lamp. As a result of a strong heat
development the LED can be damaged!
▪
Do not cover the light with heat insulating materials! As a result of a strong heat development the LED can
be damaged!
▪
The manufacture does not accept any responsibility for injuries or damage resulting from improper use of
this product!
▪
Any other use than the description may result in damage to the product. So the dangers are such as
electric shock, short circuit, fire etc.
▪
We reserve the right to make changes to the product, the packaging or the operating instructions as well as
printing errors.
▪
Protect the product from external damage, heavy dirt, moisture and excessive heat!
▪
In order that the warranty claim does not expire please use only the supplied items. Repairs may only be
done by an expert and only by using original spare parts!
▪
In commercial institutions, the accident prevention regulations of the professional trade association for
electrical equipment and facilities must be adhered to.
Notes on commissioning:
Caution:
Do not put the product into operation until all cables are connected together! Make sure that the mains
voltage of your house line corresponds to the specifications in the "Technical Data"!
▪
This product is only suited for indoor-use and not for outdoor-use!
▪
For mounting the lamp, choose a stable mounting surface that can support the weight of the lamp. The
manufacturer is not liable for damage caused by the use of an unsuitable mounting surface!
▪
Install the lamp on a dry and non-conductive surface!
▪
This product is suitable for mounting on normally flammable surfaces!
▪
Plan a minimum distance of 50cm between the illuminated area and the lamp.
▪
To prevent damage to the cables, they must not be strongly bent, pulled or twisted during commissioning!
Technical Data:
Operating voltage:
Nominal wattage:
Nominal luminous flux:
Rated color temperature:
Electrical protection:
Protection class:
This product contains a light source of energy efficiency class F.
Keep this product away from children and animals! The packaging contains small parts
▪
An exchange of the built-in luminous in the light is not possible!
12V DC
4 x 1,8W
4 x 190lm
3.000K
IP20
IIl
5