Descargar Imprimir esta página

Outsunny 840-256V90 Instrucciones De Montaje E Instalación página 2

Publicidad

Idiomas disponibles

Idiomas disponibles

Maintenance recommendations
●Metal: Wash with mild soapy water and rinse with clean water.
Dry with a lint free cloth. Avoid using detergents and acidic products.
●Fabric: Dry cleaning.
●Plastic: Dust regularly with a clean, soft, and dry cloth.
Avoid using any corrosive products.
Required tools: screwdriver, hammer, drill bit, wrench (roller, inner hexagon)
Important reminder: Before starting to assemble furniture, make sure to receive all
the parts.
Precautions for use:
1. Keep children and pets away from assembly points.
2. For your safety, do not assemble alone. For safety reasons, we recommend two
people to assemble.
3. Some parts may have sharp edges. During the assembly process, if necessary,
please wear protective gloves.
4. Basic precautions should be taken when assembling and using this product to
limit the risk of injury and property damage.
Please read
5. For outdoor use only. This product should not be used in situations where the
wind force is greater than level 5 (29-38km/h).
This product is only used to generate shadows and cannot withstand harsh
weather.
6. Turn off the product in adverse weather, moderate to strong winds, heavy rain, or
heavy snow. Do not use this product in cold weather
as it may Damage or affect its performance.
7. Check all nuts to ensure they are securely tightened before and during use.
8. The warranty does not include damage caused by adverse weather conditions.
9. Do not light candles, matches, or open flames below or near the product.
10. Warning: Do not place any flames or heat sources near the tent fabric.
11. For safety reasons related to internal temperature, the engine can run
continuously for 3 minutes.
If the engine starts for more than 3 minutes, it will stop working.
Please wait for 15 minutes for the engine to be used again.
To provide you with information, the internal temperature of the engine will return to
the initial temperature after 5 hours.
12. Warning: When cleaning, maintaining, and replacing parts, the product plug
should be unplugged.
13. Warning: Important safety instructions. Following these instructions is
important for people's safety. Follow these instructions.
14. Warning: Important safety instructions. Please follow all instructions as
improper installation may cause serious injury.
Assembly instructions:
Our clear assembly instructions will guide you step by step from the beginning to
the end of the assembly project. In this way, you will receive high-quality products.
Easy to assemble, it will bring you years of satisfaction.
You only need one screwdriver, one wrench (M8, M10, M12), one hammer, and two
(not included).
You only need one screwdriver, one wrench (M8, M10, M12), one hammer, and two
(not included).
1

Publicidad

loading

Este manual también es adecuado para:

840-256v90cw