Cleaning The Decanter - Mr Coffee NL Serie Manual De Usuario

2) Place a paper filter into the removable filter
basket and close the brew basket.
3) Place the empty decanter on the
warming plate.
Make sure to accurately place the
decanter on the warming plate
to avoid the possibility of overflow.
4) Start the brew cycle:
For Models NL4 and NL5:
Push the ON/OFF switch to ON
to begin the brew cycle.
For Models NLX4 and NLX5:
Slide the switch to ON. Then, press the
brew button to begin the brew cycle.
5) When 3 cups of vinegar have flowed into
the decanter, turn the coffeemaker Off
and let the vinegar stand for 30 minutes.
6) After the 30-minute period, turn coffeemaker
back On and let remainder of vinegar flow
through.
14
7) Discard both the vinegar and paper filter.
8) Fill the decanter with tap water and pour it into
the water reservoir.
9) Place the decanter on the warming plate
and begin the brew cycle.
10) When the brew cycle is complete, discard the
water in the decanter and turn the coffeemaker
Off. If necessary, repeat steps 8 through 10 to
flush all traces of vinegar from the coffeemaker.

Cleaning the Decanter

Hard water can leave a whitish stain on the decanter.
Coffee and tea may then turn this stain brown.
To remove decanter stains:
1) Fill the decanter with a solution of equal parts
tap water and vinegar and let the solution stand
in the decanter for approximately 20 minutes.
2) Discard the solution and wash and rinse
the decanter.
Do not use harsh abrasive cleansers
that may scratch the decanter;
scratches may cause the decanter
to break.
15