Reencle Prime Manual Del Usuario página 10

R E E N C L E P R I M E - U S E R M A N U A L
Power
Press the power button to turn on and
POWER
off the device.
Always keep the power turned on. Reencle
is equipped with an automatic sleep mode.
In case of a service or repair, power off first,
and then unplug the device.
Dry
Press this button when the internal
DR Y
contents of the stirring tank become
boggy with too much water.
Purify
Press this button when you notice a
PURIFY
bad odor to help reduce the smell.
1st click Press and hold the lock button for three seconds for the first time:
A red LED will flash around the lower sensor. This indicates that the automatic sensor
is now locked and will not automatically open the small lid. Do open the small lid in
this setting, press the "Open" button.
2nd click Press and hold the lock button for three seconds for a second time:
A red LED will remain on the lower automatic sensor, and red LED will turn on around
the "Open" button. In this setting, neither the automatic sensor nor the "Open" but-
ton will open the small lid.
3rd click Press and hold the lock button for three seconds for a third time:
The red lights around the automatic sensor and the "Open" button will turn off, and
both the automatic sensor and "Open" button will be unlocked and functional again.
1 0
Control buttons
Reencle Prime's touch controls are located on the
top of the receptacle. Functions are as follows:
Open
Press this button to open the small
OPEN
cover of Reencle to deposit food
waste.
Check
Indicates product errors in the
product or buttons through flickering
LED with alarm sounds.
Lock
The open button includes a lock
feature. How to opperate the lock
button:
E N G L I S H