Publicidad
Idiomas disponibles
Idiomas disponibles
R E E N C L E P R I M E - U S E R M A N U A L
08. Frequently asked questions
Q. There is
condensation on the
inner surface of the
cover and on the inner
sides of the product.
Q. Mold has grown on
the inner walls and over
the microorganisms.
Q. Microbes have
accumulated and set on
the corners and walls of
the tank.
Q. If I am away from
home for days, do I
need to take any
special measures?
Q. Microorganisms
agglomerate (clump).
1 6
The internal temperature of the product is set to be maintained at 122
to 140 degrees fahrenheit (50-60 degrees Celsius), which is suitable for
culturing microorganisms. When 6-7 cups of water is initially added, or
in the course of general food decomposition, condensation may occur
on the cover and the inner walls due to the difference between the
internal and external temperature. Condensation is a natural pheno-
menon and is not considered to be a problem.
Mold is often found over the microorganisms, inner sidewalls, and
the stirring rods, but has nothing to do with microorganisms. Use the
shovel provided to mix it with the byproduct inside the stirring tank
and the mold will disappear after a few hours as they are decomposed
with the mixture. Keeping the interior walls clean will help prevent
mold.
The stirring rod rotates near the center of the product. Although it
mixes most microorganisms, byproduct may collect in the corners,
leaving microbes to accumulate on the corners and walls. Use the pro-
vided school to scrape these microbes and mix them with the mixture
befare adding food.
·
If you are away from home for less than 7 days, use Reencle as you
normally would, and refrain from putting food in the Reencle Prime for
two days before your departure.
·
If you will be away from home for more than 7 days, refrain from
putting food in the Reencle Prime 2 days before departure to ensure it
completely decompases the existing waste in the bin before you leave.
On the day of departure, turn off the product and unplug the power
cord.
·
You do not need to remove the byproduct microorganisms from Reen-
cle Prime. Simply leave it closed. When you return, turn on the Reencle
Prime, add two cups (16.9 oz) of water to the mixture and leave it for
4-6 hours before starting to use it again.
The aggregation of the microorganisms found inside of the product
indicates insufficient decomposition of the microorganisms. Give them
more time for decomposition and do not add additional waste into the
Reencle Prime. After the microorganisms return to their original form,
which may look like soil, it indicates that it is ready again to decompase
the food.
E N G L I S H
Publicidad
