LG LW1510ER Manual Del Propietário página 14

Instaflafion
Open the window. Mark a line on the center of the SiU
window stool between the side window stop Bracket _)
moldings.
Carriage
Loosely attach the sill bracket to the support Bolt @
bracket using the carriage bolt and the lock nut.
®
Lock nut(_)
Attach the sill bracket to the window sill using the
screws (Type B).
Carefully place the cabinet on the window stool
and align the center mark on the bottom front with
the center line marked window stool
Cabinet
Track hole
Support -
Bracket (
Carriage bolt
and lock nut
and lock nut
Outer edge
of window
sill
(Type B)
Sill bracket (_
Using the M-screw and the lock nut, attach the
support bracket to the cabinet track hole. Use the first
track hole after the sill bracket on the outer edge of
the window sill. Tighten the carriage bolt and the lock
nut. Be sure the cabinet slants outward.
_ CAUTION: Do not drill a hole in the bottom
pan, The unit is designed to operate with Upper
Guide
approximately 1/2" of water in bottom pan.
Front angle
Window stool
Pull the bottom window sash down behind the Top
retainer bar until they meet.
Ir2"_Ft'4r3:1. Do not pull the window sash down so tightly
that the movement of Frame curtain is
restricted.
Attach the cabinet to the window stool by
driving the screws (Type B) through the
cabinet into window stool
2. The cabinet should be installed with a very
slight tilt downward toward the outside.
Window sash
Foam _-
-Seal @
Cabinet /
Frame curtain
Ipper Guide
Foam-PE
14 Room Air Conditioner