Autool AS502 Manual Del Usuario página 4

For MOTUL DOT4
For MOBIL DOT4
For BOSCH DOT4
For VALEO DOT4
Battery Installation Instructions
● Open the battery cover on the back of the device.
●
Insert the batteries (4 x 1.5V AAA batteries), paying attention to the correct polarity.
●
Close the battery cover securely.
Operations Instruction
● The probe should be wiped clean before each measurement.
●
Press and hold the [
●
Press [ ] for mode selection: standard mode and expert mode.
●
Press [ ] to turn off the backlight.
●
Submerge the probe in the brake fluid.
●
Press [ ] to perform a brake fluid water content measurement.
●
The interface will display the percentage of water content.
●
Indicates [
is between 2%-3% and [
●
After the measurement is completed, press and hold the [
the tester.
●
The instrument will automatically power off after 5 minutes of no activity.
For CASTROL DOT4
] key for more than 2s to power on the tester.
] when the water content is between 0%-2%, [
] when it is higher than 3%.
Expert Mode
For ATE DOT4
For BREMBO DOT4
For FUCHS DOT4
3
For FERODO DOT4
For TRW DOT4
For TOTAL DOT4
For TEXTAR DOT4
] when the water content
] key for 2s for shutdown